Head Transfer Mode: Bottling and Canning

The mode

Once carbonation is complete (target pressure and tank pressure matching), switch the FizzWizz into head transfer mode. The CO2 input connects directly to the arm fitting, and CO2 flows from the regulator through the arm separator straight into the headspace.

Why it matters

The unit holds head pressure absolutely steady, with no drifting. That matters because if head pressure drifts, your bottle fill levels go up and down with it.

The numbers

Head pressure defaults to 15 PSI, which is what most bottling lines want to run. Adjust it up or down as needed. During the entire filling process, the head pressure varies by about 0.02 PSI. The moment pressure dips below setpoint, CO2 flows in to restore it, then settles just above.

Consistent head pressure means consistent fill levels, batch after batch.

Packaging day is where carbonation quality pays off. Contact us.